Publicité
STEP 4
PASSO 4
4-1. Rimuovere i 4 bulloni dal bruciatore.
4-1. Remove the 4 bolts from the burner.
STEP 4
4-2. Inserire il tubo del gas attraverso il montante.
4-2. Put the gas hose through into the post.
4-3. Fissare l'unità bruciatore al montante con i 4 bulloni.
4-1. Remove the 4 bolts from the burner.
4-3. Fix the burner unit to the post by the 4 bolts.
4-2. Put the gas hose through into the post.
4-3. Fix the burner unit to the post by the 4 bolts.
PASSO 5
STEP 5
5-1. Verificare che il montante verticale e il collegamento del
5-1. Check whether the connection of vertical post and burner are
STEP 5
bruciatore siano assemblati secondo le istruzioni e che tutti
i dadi e i bulloni siano serrati.
assembled according to instructions, and all bolts and nuts are
5-1. Check whether the connection of vertical post and burner are
5-2. Posizionare 3 rondelle piatte grandi su 3 distanziatori riflettori.
tightened.
assembled according to instructions, and all bolts and nuts are
5-2. Put 3 pcs Large Flat Washers on 3
tightened.
5-2. Put 3 pcs Large Flat Washers on 3
STEP 6
STEP 6
Fasten the reflector with 3 pcs Large Flat Washers and 3 pcs Wing Nuts.
Fasten the reflector with 3 pcs Large Flat Washers and 3 pcs Wing Nuts.
PASSO 6
Fissare il riflettore con 3 rondelle piatte grandi e 3 dadi ad alette.
Reflector Spacers.
Reflector Spacers.
- 8 -
- 8 -
PASSO 4
STEP 4
STEP 4
Bulloni
Bolt
Bolt
PASSO 5
STEP 5
STEP 5
Distanziale
Reflector Spacer
riflettore
Reflector Spacer
PASSO 6
STEP 6
STEP 6
Dado ad alette
Wing nut
Wing nut
Riflettore
Reflector
Reflector
59
Publicité
Chapitres
