Bosch UniversalChain 35 Notice Originale page 16

16 | English
Technical Data
Chain saw
Article number
Rated power input
Chain speed (no-load)
Chain bar length
Saw chain type
Saw chain pitch
Drive link thickness
Amount of drive links
Max. cutting diameter
Oil reservoir capacity
Automatic chain oiler
Toolless chain tensioning (SDS)
Nose sprocket
Kickback brake
Run-down brake
Gripping teeth
Weight according to EPTA‑Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable
mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.
Noise/Vibration Information
Noise emission values determined according to EN 62841-4-1
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-1
– Vibration emission value a
h
– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
F 016 L94 478 | (17.05.2022)
W
m/s
cm
Oregon AdvanceCut
mm
mm
ml
kg
3 600 HB8 3..
3 600 HB8 1.0
dB(A)
dB
2
m/s
2
m/s
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
UniversalChain 35 UniversalChain 40
3 600 HB8 3.. 3 600 HB8 4..
3 600 HB8 1.0 3 600 HB8 1.1
1800
12
35
Oregon AdvanceCut
3/8" low profile 3/8" low profile
1.1 (0.043") 1.1 (0.043")
52
300
250
●
●
●
●
●
●
4.3
/ II
3 600 HB8 4..
3 600 HB8 1.1
94
2.0
4.0
1.5
Bosch Power Tools
1800
12
40
57
350
250
●
●
●
●
●
●
4.4
/ II
94
2.0
4.0
1.5