Bosch UniversalChain 35 Notice Originale page 15

If the supply cable on the product is damaged, it must only
be replaced by a Bosch Service Centre. Only use approved
extension cables.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Movement direction
Reaction direction
Weight
Permitted action
Prohibited action
Audible noise
Accessories/Spare parts
Product description and
specifications
Read all safety warnings and all instruc-
tions. Failure to follow the safety warnings and
instructions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the ending of this operat-
ing manual.
Intended Use
The power tool is used for sawing trees and tree trunks near
the ground. Cuts can be sawed with or across the grain.
This power tool is not suitable for sawing mineral materials.
Bosch Power Tools
This power tool is not intended for felling trees.
Delivery Scope
Carefully remove the machine from its packaging and check
if the following parts are complete:
– Chain saw
– SDS cover
– Saw chain
– Chain bar
– Chain guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
Saw Chain Lubrication (see figure A)
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Rear handle
(2) On/Off switch
(3) Drive sprocket
(4) Front handle
(5) Hand guard/Activation lever for kickback brake
(6) Serial number
(7) Oil outlet
(8) Oil seal
(9) Guide fin for chain bar
(10) Fastening bolt
(11) Chain catch bolt
(12) Gripping teeth
a) b)
(13) Mains plug
a) b)
(14) Extension cable
(15) Symbol for rotation and cutting direction
(16) Nose sprocket
(17) Chain bar
(18) Saw chain
(19) Affixed tensioning wheel
(20) Oil filler cap
(21) Oil viewing window
(22) Lock-off button for On/Off switch
(23) Chain-tensioning ring
(24) Clamping knob
(25) SDS cover
(26) Chain guard
a) country specific
b) The accessories illustrated or described are not included as
standard delivery.
English | 15
F 016 L94 478 | (17.05.2022)