Dual Mode (Inputs A And B Separately) - Kübler 573 Serie Mode D'emploi

6.4.2. Dual Mode (Inputs A and B separately)

A
B
Menu Text
Input B range
Set the desired range for input B
Start value
Value which the unit will display with a
zero input signal of 0 volts or 0/4 mA
End value
Value which the unit will display with a
full scale input of 10 volts or 20 mA
Decimal point for signal B
Select the desired position of the decimal
point
000000
00000.0
0.00000
Average filter input B
Adjustable floating average filter for
smoothing the display with unsteady input
signals
2,4,8,16
Offset value for input B *)
Offset value for the zero displacement of
input A signals
*) When Tare function is switched on only
6.573.011.E00_7b_e.doc / Sep-08
With this mode, the SET key selects between display of channel A and
display of channel B, and the bar of the high order LED indicates which
of the two channels is actually in display.
Voltage +/-10V
Current 0-20 mA
Current 4-20 mA
No decimal point
one decimal position
---->
five decimal positions
No filtering
Number of floating averaging
cycles
Input Range
-99999 ... 99999
-99999 ... 99999
-99999 ... 99999
Default
0
1000
000000
0
Page 16 / 28