Introduction - Kübler 573 Serie Mode D'emploi

1. Introduction

Some of the general demands to an up-to-date process controller for automation industry are
always high flexibility, combined with easy and simple operability.
Many applications require two separate analogue inputs for use with single or combined
operation.
Also it may be important to display and evaluate both, linear and non-linear analogue inputs at
an acceptable accuracy, which requires programmable linearisation functions.
Process controllers of series 573 have been designed for this kind of requirements.
Model 6.573.011.E00 (as present) provides two programmable Preselections with Optocoupler
outputs
Model 6.573.012.E90 however provides additional analogue outputs instead of the
Preselections (see separate operating instructions)
All other functions within this controller family are fully similar.
6.573.011.E00_7b_e.doc / Sep-08 Page 4 / 28