Modes Of Operation; Single Mode (Input A Only) - Kübler 573 Serie Mode D'emploi

6.4. Modes of operation

6.4.1. Single mode (input A only)

Menu Text
Input A range
Set the desired range for input A
Start value
Value which the unit will display with a
zero input signal of 0 volts or 0/4 mA
End value
Value which the unit will display with a
full scale input of 10 volts or 20 mA
Decimal point for signal A
Select the desired position of the decimal point
000000
00000.0
0.00000
Average filter input A
Adjustable floating average filter for smoothing
the display with unsteady input signals
2,4,8,16
Offset value for input A *)
Offset value for the zero displacement of input
A signals
*) When Tare function is switched on only
6.573.011.E00_7b_e.doc / Sep-08
Voltage +/-10V
Current 0-20 mA
Current 4-20 mA
No decimal point
one decimal position
---->
five decimal positions
No filtering
Number of floating averaging
cycles
Setting Range
-99999 ... 99999
-99999 ... 99999
-99999 ... 99999
Default
0
1000
00000.0
2
0
Page 15 / 28