Kübler 573 Serie Mode D'emploi page 29

Fritz Kübler GmbH
Zähl- und Sensortechnik
Postfach 34 40
D-78023 Villingen-Schwenningen
Tel.: 07720-3903-0
Fax: 07720-21564
www.kuebler.com
Process Controller Series 573
Two Analogue Inputs and Calculations
6.573.011.E00: Process Controller with 2 Presets and Optocoupler Outputs
6.573.012.E90: Process Controller with Analogue Outputs 0 - 10 V und 0/4 – 20 mA
• Two analogue inputs with independent scaling, each +/- 10V or 0/4 – 20 mA
• Operating modes for display of input A, input B as well as combinations
A + B, A - B, A x B und A : B
• Fully programmable scaling and zero definitions
• Useful supplementary functions like Tare function, programmable averaging
functions, programmable linearisation etc.
• Power supply 115/230 VAC and 17-30 VDC in the same unit
• Aux. output 24 VDC / 100 mA for sensor supply
Operating Instructions for Model
6.573.011.E00 with 2 Optocoupler Outputs
6.573.011.E00_7b_e.doc / Sep-08
Multi-Function Units with
Page 1 / 28