C.P.Bourg Binding System BB3000 Mode D'emploi page 10

May 1996
OPERATING INSTRUCTIONS
Program 4 - Padding (no clamping nor automatic pad ejection).
PRELIMINARIES
Loading
Sheets clamping
Start of the process
Notching / milling
Glueing
Carriage opening
Pad withdrawal
Carriage return
* A change of binding mode during operation requires the full stop of the binder
( emergency (12) ).
** Carriage won't return if the buttons are not pressed.
*** Check the first pad. Change the settings if necessary .
Attention ! : Lifting the plexi cover or pressing the emergency stop button stops the glue heaters.
to be able to work again quickly : release emergency knob and switch on the glue roller
immediately, otherwise it will cool down and take time to warm up again to operational
temperature.
GB/ 6
- Switch "on" (9) the binder.
- Select (21) programme mode n° 4. *
- Switch "on" (17) the drum heating.
- Option : Select (8) for each day of one week the time that the
machine will automatically switch to stand by condition.
- The binder is ready to operate when the green lights in
buttons (10) are on.
- Switch "on" (16) jogger (unless footswitch option is used).
- Select (18) when notching/milling is required.
- Eventually adjust (7) milling depth.
- Select (20) notching/slitting density.
- Select (19) carriage pre-opening memory closest to pad
thickness
- Insert the sheets at the left end of the opening
of the carriage (spine downwards).Their jogging
is automatic if (16) is selected.
- When pressing both the carriage closure
buttons (10 & 10').
- Automatic if warning light (18) is on.
- Automatic if (18) is selected. (green light on)
- Automatic.
- Wait until glue has cooled down. Grip the
pad and press button (11)
- Take the pad away from the top .***
- Press both the buttons (10).**