Accessories; Hose, Extension Wands & Cleaning; Tool Storage - RIDGID VAC50000 Mode D'emploi

SP6947 RIDGID 5 Gallon ESF_SP6947 3/11/15 9:50 AM Page 10

Accessories

Hose, Extension Wand, and
Cleaning Tool Storage
1. Slide the extension wands at the far
sides of the Accessory Storage Bin
located on the right side of the
Stor-N-Go Vac. Slide the lighted car
nozzle and the crevice tool next to the
extension wands in the storage bin.
Position the dusting brush horizontal
and slide it into the storage bin's
accessory slot. It is necessary to place
the dusting brush into the accessory
slot first, as the utility nozzle will not fit
in this position. Last, place the utility
nozzle flush against the accessory slot
storage area and slide down into
storage position. The storage bin
accommodates both extension wands
and the four cleaning tools.
Accessory
Slot Storage
Area
Extension
Wands
Lighted
Car Nozzle
Crevice
Tool
Utility
Nozzle
Dusting Brush
2. Insert the 7 foot Super Flex Hose ends
into the hooks on the left side of the
Stor-N-Go Vac, as shown below.
3. Form a double loop with the 14 foot
Tug-A-Long Hose and hang on hose
storage hook at the top of the rack.
14 Foot
Tug-A-Long Hose
Storage
Accessory Bin
Super Flex Containing
7 Foot Super
Hose 2 Extension
Flex Hose
Wands and
4 Cleaning Tools
10
Storage
Accessory Bin
Containing 2
Extension Wands
and 4 Cleaning
Tools