Accessories; Hose, Extension Wand & Cleaning Tool Storage - RIDGID WD55000 Manuel Du Propriétaire

Accessories

Hose, Extension Wand, and
Cleaning Tool Storage
1. Slide the extension wands at the far
sides of the Accessory Storage Bin
located on the right side of the Stor-N-
Go Vac. Slide the car nozzle and the
crevice tool next to the extension
wands in the storage bin. Position the
dusting brush horizontal and slide it
into the storage bin's accessory slot. It
is necessary to place the dusting brush
into the accessory slot first, as the
utility nozzle will not fit in this position.
Last, place the utility nozzle flush
against the accessory slot storage area
and slide down into storage position.
The storage bin accommodates both
extension wands and the four cleaning
tools.
Accessory
Slot Storage
Area
Extension
Wands
Car Nozzle
Crevice
Tool
Utility
Nozzle
Dusting Brush
2. Insert the 7 foot Super Flex Hose ends
into the hooks on the left side of the
Stor-N-Go Vac, as shown below.
3. Form a double loop with the 14 foot
Tug-A-Long Hose and hang on hose
storage hook at the top of the rack.
14 Foot
Tug-A-Long Hose
Super Flex
7 Foot Super
Hose
Flex Hose
11
Storage
Storage
Accessory Bin
Accessory Bin
Containing
Containing 2
2 Extension
Extension Wands
Wands and
and 4 Cleaning
4 Cleaning Tools
Tools