Scope Of Application; In General; Description And Type Of Device; Ec - Declaration Of Conformity - Kulzer signum HiLite pre 2 Mode D'emploi

1

Scope of application

1.1

In general

HiLite pre 2 is a registered trademark of Kulzer GmbH.
Author f48618
These operating instructions apply to:
Order no.
66059751
1.2

Description and type of device

Description of the device
Pregelling unit for intermediate polymerisation of
light-curing composite materials in dental laboratories.
1.3 EC – Declaration of Conformity
We, Kulzer GmbH, Leipziger Straße 2, 63450 Hanau, hereby declare that the design, structure and version introduced
GB
to the market of the unit described below correspond to the relevant safety and health requirements of the norm for the
photobiological safety of lamps and lamp systems (IEC 62471:2006, modified); German version EN 62471: 2008.
This declaration shall become invalid in the event of an alteration made to the unit without our prior authorisation.
- 2 -
2

Instructions on using the unit safely

2.1

Explanation of symbols and accompanying word(s)

Symbols Accompanying word(s)
CAUTION
NOTE
WARNING OF EXPLOSION WARNING of explosion – observe information and warnings in the chapters
WEEE / ElektroG
2.2

Transport damage

Check the unit for damage after receiving it. If it is damaged, report this to the transportation company within 24 hours
of delivery.
Under no circumstances, install or work with a damaged unit and / or accessories.
2.3

Operator's obligations

In addition to complying with the statutory regulations specified by the manufacturer, the operator must ensure the
statutory obligations are observed and implemented in the workplace, i.e. he must train his personnel and comply with
industrial safety legislation and any other regulations or laws in force.
For working on and with the machine, the operator must draw up written instructions in understandable form and give
these to his employees in their own language. These instructions must be based on the operating manual and written
in light of the work to be performed.
2.4

Unit diary

We recommend that you keep a " unit diary " and document all tests, and major work (e.g. servicing, changes) in it.
Keep this operating manual in a safe place so that you can consult it whenever you need safety instructions and
important user information.
2.5

Safety instructions

The safety instructions for personal safety, the surroundings, and the goods being machined depend heavily on the
behaviour of the people using the machine.
Before putting the machine into operation, read the operating manual carefully and follow the instructions to avoid
errors and damage, especially damage to your health.
Type
HiLite pre 2 – Pregelling unit for intermediate polymerisation
Explanation
Safety­relevant chapter and sections of the Working Instructions.
Note in the Working Instructions about optimum use of the device.
and sections marked with the following pictorial symbols.
Disposal of old equipment according to WEEE (European Directive) or
Electrical and Electronic Equipment Act (German Law ElektroG).
Date
2017-07 / 99001117/11
Device type Valid from:
HiLite pre 2 2017-07