Finishing; Installing Viewing Door - Napoleon NPS45 Instructions D'installation Et D'opération

6.0 finishing

6.1

installing viewing door

THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
The main viewing door has been boxed separate from the appliance, but MUST be installed before
burning the appliance.
A. Open both side panels, exposing the bushing on the left and the latches
on the right.
Align the pins on the door to the bushing on the left side of the appliance.
B.
Lower into place until both bushings touch.
Engage the latch hooks into the door frame. Snap the rear handle hook to
C.
lock the latch closed.
!
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
WARNING
29
75.2
INSERT ILLUSTRATED
W415-1472 / B / 02.05.18
EN