Booster Mode Installation - Diono radian 3RX Mode D'emploi

3
58
radian 3RX
BOOSTER MODE
instructions d'installation
BOOSTER MODE INSTALLATIONS:
40–120 lb (18–54 kg)
WARNING! Use ONLY the vehicle lap/shoulder belt
system when restraining the child in this booster
seat. DO NOT USE A LAP BELT ONLY!
WARNING: Make sure the vehicle seat belt can
properly retract before each use.
DO NOT use adjustable bottom.
ALWAYS secure the child restraint using the vehicle
belt or LATCH/UAS connectors even when it is
unoccupied. It could injure other occupants in a
Radian 3 RXT
sudden stop or collision.
Rainier 2 AXT
NOTE: If 5-Point harness is installed, please review
the harness removal section. The 5-Point harness
MUST be removed to use this seat in booster mode.
diono.com
Radian 3 RXT
Rainier 2 AXT
59