Latch/Uas Installation; Lap/Shoulder Belt Installation - Diono radian 3RX Mode D'emploi

Diono RECOMMENDS that children be rear-facing
until they reach the maximum rear-facing height
and weight. This car seat can remain rear-facing up
to 50 lb (22.7 kg).
LATCH/UAS Vehicle
Strap Lap/Shoulder Belt
FORWARD-FACING
30
radian 3RX
ALWAYS
ONLY.
mode.
1.
Vehicle Lap
2. Once aligned, press the lever
Belt
REAR-FACING BASE
use rear-facing base on rear-facing installs
DO NOT use for forward-facing or booster
Align posts as shown in
color coded dots. Slide the base into place to
align the dots blue-to-blue, yellow-to-yellow.
1
shown into the seat base to
engage.
Confirm base is locked and
does not move.
diono.com
GREY
by aligning the
2
31