Diono radian 3RX Mode D'emploi page 23

ADJUSTABLE BOTTOM
WARNING! Use adjustable bottom for forward-facing
installs only.
DO NOT use rear-facing.
IMPORTANT: If the child is
lower the adjustable bottom.
1. Lift the bottom bar up and grasp
the upper bar toward the seat
bottom to release.
2. Pull bar towards you to extend
the adjustable bottom. Listen for
audible "click" to confirm bottom
is in locked position.
To store adjustable bottom, lift the lower bar up while
grasping the top bar and push the bottom back into
the seat base.
44
radian 3RX
DO NOT use in booster mode.
OVER 25 LB (11.3 KG),
1
2
SAFE STOP
Safe Stop is for use ONLY
installations from 22–40 lb (10–18 kg).
DO NOT USE REAR-FACING.
IMPORTANT: The Safe Stop will need to be removed
once the child reaches 40 lb (18 kg).
1. Detach Safe Stop from
location 3 on back of seat.
2. Remove harness straps from
metal plate. Detach harness
from metal plate on back of
seat. Once detached, thread
both harness straps onto the
metal hook of the Safe Stop.
Connect left side of harness
first, then follow with the right.
3. 3. Thread bottom of Safe Stop Thread bottom of Safe Stop
onto the harness strap hook. onto the harness strap hook.
Check to ensure proper
engagement to the metal plate.
Take care to ensure harness
straps are not twisted and are
clear from any obstructions.
diono.com
in forward-facing
3
1
2
3
45