Backless Booster - Diono Cambria 2 Manuel D'instructions

SECURING THE CHILD
PROPER BUCKLE POSITION
IMPORTANT: After booster seat is installed and seat belt
is fastened around child, it is important to confirm correct
seat belt buckle position to ensure secure installation.
CORRECT SEAT BUCKLE
POSITION
Buckle is on the outside of
lower belt guide.
24
Cambria® 2
INCORRECT SEAT
BUCKLE POSITION
If buckle is being pulled
across the lower belt guide
and into the seat, choose
another seating position
within the vehicle.
While this booster seat is designed to offer advanced
side-impact protection with its backrest section attached,
the seat bottom can also be used alone as a backless booster.
WARNING! Use ONLY the lap and shoulder belt system
when restraining the child in this booster seat.
DO NOT use lap belt only.
WARNING! ONLY use with children
whose ears are below the top of the
vehicle seat or headrest.
1. Remove the backrest by reversing
the steps shown in "Seat Assembly."
2. Make sure both LATCH/UAS
connectors are securely attached
to the vehicles lower anchors.
While pushing booster against
vehicle seat, pull the adjuster
straps tight.
3. The booster seat should rest
firmly on vehicle seat bottom
and touching the vehicle seat
back. The entire seat bottom
should sit flat on the vehicle seat.
diono.com

BACKLESS BOOSTER

2
3
25