Bosch 24618 Consignes De Fonctionnement/Sécurité page 9

BM 2610034434 09-15_24618 25618 IWH181 9/8/15 9:27 AM Page 9
Disconnect battery pack
from tool before making
WARNING
any assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
INSERTING AND REMOVING
ACCESSORIES
(Model 25618 only)
To avoid loss of control,
ensure bit is locked in chuck
WARNING
by pulling on bit after it has been inserted.
The chuck accepts only standard 1/4"
hexagonal shank accessories with power
groove.
Your tool is equipped with a quick release
chuck. To insert an accessory, simply pull
locking sleeve forward, insert desired
accessory into chuck and release locking
sleeve (Fig. 2).
INSERTING AND REMOVING
ACCESSORIES
(Models 24618, & IWH181 only)
Attach only high quality accessories with the
proper size square drive designed for use with
impact wrenches.
(Model 24618)
Your impact wrench is equipped with a 1/2"
square drive.
(Model IWH181)
Your impact wrench is equipped with a 3/8"
square drive.
INTENDED USE
This tool is intended for the fastening and
loosening of bolts, nuts and various threaded
fasteners. This tool is not intended for use as a
drill.
VARIABLE SPEED CONTROLLED
TRIGGER SWITCH
Your tool is equipped with a variable speed
trigger switch. The tool can be turned "ON" or
"OFF" by squeezing or releasing the trigger.
The speed can be adjusted from the minimum
Assembly
FIG. 2
To remove an accessory, pull locking sleeve
forward and simply remove it from the chuck.
To install a socket, simply push completely
onto output drive. To remove, pull off output
drive (Fig. 3).
FIG. 3
Operating Instructions
to maximum nameplate RPM by the pressure
you apply to the trigger. Apply more pressure
to increase the speed and release pressure to
decrease speed (Fig. 1).
When the trigger switch is released it
activates the brake to stop the chuck quickly.
This is especially useful in the repetitive
driving and removal of screws.
-9-
LOCKING SLEEVE
CHUCK
SCREWDRIVER
BIT
SCREWDRIVER BIT
SOCKET
BRAKE
FORWARD/REVERSING
BIT HOLDER
OUTPUT
DRIVE