Yamaha WR250F Manuel D'atelier page 584

SWINGARM
Swingarm
1. Install:
Bushing 1
G
Thrust bearing 2
G
Oil seal 3
G
Collar 4
G
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushings, thrust bearings and oil seal lips.
2. Install:
Collar 1
G
To relay arm 2.
NOTE:
Apply the molybdenum disulfide grease on the
collars, bearings and oil seal lips.
3. Install:
Collar 1
G
To connecting rod 2.
NOTE:
Apply the molybdenum disulfide grease on the
collar, bearings and oil seal lips.
4. Install:
Connecting rod 1
G
Bolt (connecting rod) 2
G
Washer 3
G
Nut (connecting rod) 4
G
To relay arm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5 - 57
CHAS
80 Nm (8.0 m · kg, 58 ft · lb)