Yamaha WR250F Manuel D'atelier page 562

2
1
B
1
2
3
5 - 46
HANDLEBAR
11. Install:
Clutch cable 1
G
Decompression cable 2
G
NOTE:
Apply the lithium soap base grease on the
clutch cable end and decompression cable
end.
12. Adjust:
Clutch lever free play
G
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
Decompression lever free play
G
Refer to "DECOMPRESSION LEVER
ADJUSTMENT" section in the CHAP-
TER 3.
13. Fasten the decompression cable 1 and
clutch cable 2 with a clamp 3.
14. Insert the end of the fuel breather hose
1 into the hole of the steering stem.
CHAS