Multipurpose Lc Display And Keyboard; Programming; Select Operation Mode - Helios ETR Instructions D'installation Et D'utilisation

Installation and Operating Specification ETR

6 Multipurpose LC display and keyboard

17.6 °C
Actual value
Program key and open menu
P
Menu selection, reduce value
▼
Menu selection, increase value
▲
ESC-key combination, Escape = leave menu
▼ + ▲
Messages on the display
!

7 Programming

7.1 Select operation mode

Information
Simple installation is possible through the selection of the preprogrammed mode of
operation.
This determines the basic function of the device, factory set
Mode
2.00
2.01
L-BAL-E293-GB 1841 Index 001
Line 1: 16 figures for actual and desired values
Line 2: 16 figures for menu text
Exceeding measuring range
Moon symbol = Adjustment for Setpoint 2 active
Temperature sensor: output 0...10 V proportional to measuring range
Temperature controller (P): output 0...10 V depending on adjusted Setpoint an
measured Actual value (Factory setting)
Multipurpose LC display and key-
Function
Part.-No.
9/19
.
2.01
board