Technical Data - STERWINS 20VHT2-50.1 Notice De Montage, Utilisation Et Entretien

Masquer les pouces Voir aussi pour 20VHT2-50.1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
- Vibration injuries : use designated handles and try to reduce working time and
FR
exposure.
- Injuries caused by noise : wear ear protection and reduce working time and exposure.
ES
- Inhalation of dust and particles.
- Wear eye protection at all times.
PT
If you experience any of these factors while using the machine, stop the machine consult
your doctor immediately
IT
• Injuries may be caused or aggravated by prolonged use of a tool. When using any tool
for prolonged periods, ensure you take regular breaks.
EL
• Prolonged use of the product exposes the user to vibrations that can cause a range of
PL
conditions collectively known as hand-arm vibration syndrome (HAVS) e.g. fingers going
white; as well as specific diseases such as carpal tunnel syndrome.
RU
• To reduce this risk when using the product, always wear protective gloves and keep your
hands warm.
KZ

3. TECHNICAL DATA

UA
RO
Machine weigh (including battery pack)
EN
Guaranteed sound power level (dB(A))
Measured sound power level (dB(A))
Sound pressure level (dB (A))
Vibration level (K=1.5m/s2)
The declared vibration total value(s) and the declared noise emission value(s) have been measured in
accordance with a standard test method and may be used for comparing one tool with another. The
declared vibration total value may also be used in a preliminary exposure assessment. The vibration
emission during actual use of the power tool can differ from the declared total value depending on
the ways in which the tool is used; and it may be necessary to identify safety measures to protect the
operator that are based on an estimation of exposure in the actual conditions of use (taking into account
all parts of the operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time).
Model
Rated voltage (V d.c.)
Blade length
Cutting capacity
Working current
Maximum current
Recommended protection
No-load speed (min-1)
20VHT2-50.1
3.01 kg with 5Ah Li-Ion battery
72dB(A)К=ЗdB(A)
Over current protection
< 2.5 m/s2
222
18 V d.c.
500 mm
15 mm
86 dB(A)
83dB(A)
K=3dB(A)
4A
7A
2400

Publicité

Table des Matières
loading

Table des Matières