Description Of Symbols - Triton TPL 180 Instructions D'utilisation Et Consignes De Sécurité

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for
safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
WARNING: Moving parts can cause crush and cut injuries
Warning: Sharp blades or teeth!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
DO NOT use in rain or damp environments!
Caution!
Dust extraction required or recommended
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
GB
4
366649_Manual.indd 4
Original Instructions
Technical Abbreviations Key
V Volts
~, a.c. Alternating current
A, mA Ampere, milli-Amp
n No load speed
0
n Rated speed
° Degrees
Ø Diameter
Specification
Rating:
No load speed:
Planing depth:
Planing width:
Blades:
Protection Class:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development, specifications of
Sound pressure L
Sound power L
WA
Uncertainty K:
Weighted vibration:
Uncertainty:
The sound intensity level for the operator exceeds 85dB(A)
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound and vibration levels
in the workplace that may be useful to domestic users who use tools for long periods of time.
Hz Hertz
, d.c. Direct current
W, kW Watt, kilowatt
/min or min -1 Operations per minute
rpm Revolutions per minute
Decibel sound level
dB(A)
(A weighted)
Metres per second squared
m/s 2
(vibration magnitude)
230V ~ 50Hz, 1500W
15,000/min
0 - 2mm
180mm
Reversible 180mm HSS steel blades, set of 3
525 x 275 x 170mm
8.6kg
Triton products may alter without notice.
:
94dB(A)
PA
:
105dB(A)
3dB
5.8m/s 2 (main handle)
7.0m/s (front handle)
2
1.5m/s (main & front handle)
2
and sound protection measures are necessary.
20/02/2019 10:22