Whittier Wood Products Gourmet 140W Instructions De Montage page 13

ZM
x 1
ZB
x 2
FIG. 16
16) Fasten sleeper (F) to the vertical divider (M) with an Angle Bracket (ZM) placed on right side
using 1/2" Undercut Screws (ZB). The top edge of the sleeper must be flush with top edge of
vertical divider. To ensure proper placement of L-Bracket (ZM) make sure the measurement
between the Left Side Assembly (G) and Vertical Divider (M) are equal from top to bottom.
ZB
x 8
DOOR
FIG. 17
17) Place one Hinge (ZO) into each of the holes in the back of the Door (N). Line up the screw holes
in the hinge with the predrilled holes in the door and insert #6 x 1/2" Undercut Screws (ZB).
See FIGURE 17A.
Attach two Hinge Plates (ZP) with the arrow facing out with #6 x 1/2" Undercut Screws (ZB) in the
predrilled holes in Left Side. See FIGURE 17B.
HINGE
ZO
ARM
ZB
ZB
SIDE
ZP
FIG. 17A
ZB
ZB
140W — Page 13