Whittier Wood Products Gourmet 140W Instructions De Montage page 10

ZL
x 1
FIG. 10
10) Attach Top Back Apron (D) with a 3/4" Cam Housing (ZL). The hole in the middle on one edge
must be toward the top. Attach the Sleeper (F) to the left front leg with the dowel (Z). The rounded
edges of the sleeper must face the front. See FIGURE 10.
ZH
x 1
ZI
x 1
ZB
x 2
ZM
x 1
11) Insert a 3" Barrel Bolt (ZH) into the hole in the Left Side Assembly (G) and with Bottom Front
Apron (H) in place begin the Barrel Nut (ZI) on the bolt to connect the apron. Attach the bottom
front apron to the bottom shelf (J) with an Angle Bracket (ZM) near the middle of the apron,
using 1/2" Undercut Screws (ZB). See FIGURE 11.
Page 10 — 140W
FIG. 11