Nikon OPTOS Monaco P200TE Manuel D'utilisation page 70

Chapter 4 - Technical Specification
For transmitter rated at a maximum output power
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power of the transmitter in watts (W) according to the transmitter manufacturer.
Note
At 80MHz and 800MHz the higher frequency range applies.
l
These guidelines may
l
absorption and reflection from structures, objects and people.
Page 70 of 76
English
listed above, the recommended separation distance d in
NOT
apply in all situations. Electromagnetic propagation is affected by
NOT
Part Number: G108707/8GWE
Copyright 2018, Optos plc. All rights reserved.