Starting The Review Software; How To Start The Application; Reviewing Patient Images And Scans; Overview Of Review Screen - Nikon OPTOS Monaco P200TE Manuel D'utilisation

Chapter 3 - How to...

FIGURE 16: Reviewing images workflow

3.3.1 Starting the review software

using any standard web browser, see Review client properties on page 65 .
Access OptosAdvance

3.3.1.1 How to start the application

1. Use your web browser to go to the address provided by your System Administrator.
2. Enter your username and password, then select
3. You can now search for a patient.
You can also run the OptosAdvance
1. Double-click the desktop icon
2. Log in using your username and password.

3.3.2 Reviewing patient images and scans

Captured images and scans are displayed using the
on using the applications.
1. Double-click
2. Log in using your username and password.
3. Select the patient.
4. Select the image or scan to be reviewed.
5. Adjust the study layout and views as required.
6. Compare results across studies if required.
Note
Detailed instructions can be found in the application help files.

3.3.2.1 Overview of review screen

After you have selected your study you can see the images captured as a series of thumbnails down the side of
the screen. Position your mouse over a thumbnail to display more details about the specific image modality.
Select Help to get more information.
Page 52 of 76
English
software from the following:
.
OptosAdvance
to run OptosAdvance.
Login . OptosAdvance starts.
software. Refer to the help files for details
Copyright 2018, Optos plc. All rights reserved.
Part Number: G108707/8GWE