Review Client Properties; Touch Screen Properties; Table Requirements; Table 9: Review Client Properties - Nikon OPTOS Monaco P200TE Manuel D'utilisation

4.1.4 Review client properties

Browser-based review clients let you review and analyze patient images.

TABLE 9: Review client properties

Review clients
Display properties for browser-based review clients.
The minimum recommended monitor resolution.
Recommended browsers for OptosAdvance.

4.1.5 Touch screen properties

The touch screen is powered from the scan head at +12V.
Do
NOT
WARNING

TABLE 10: Touch screen properties

Dimension
Minimum display resolution
Width
Depth
Height
Weight
Touch screen mount

4.1.6 Table requirements

Do
NOT
plugged directly into a wall socket.
The scan head should be positioned in the middle of the table width. The front of the scan
head should be inline with the front of the table to allow the patient to get into the correct
WARNING
alignment position.
The chin rest should slightly overhang the edge of the table.
The scan head and touch screen must be positioned on a table that meets the necessary safety standards. The
table support the weight of the scan head.
MUST

TABLE 11: Table size requirements

Dimension Details
Width 887 mm (35 inches)
Depth 600 mm (24 inches) including chin rest
Height 725 mm (29 inches) to 1205 mm (47 inches)
Part Number: G108707/8GWE
Copyright 2018, Optos plc. All rights reserved.
disconnect or connect the touch screen while the scan head is in use.
Details
1024 x 768 pixels, 16.7 million colors
260 mm (10.5 inches)
20 mm (1 inch)
216 mm (8.5 inches)
less than 1 kg
VESA MIS-D, 75, C (hole pattern: 75 mm x 75 mm)
plug the scan head into a power block or powered table. The scan head must be
Chapter 4 - Technical Specification
1280 x 1024 pixels, 16.7 million colors.
Google Chrome (46.0 and higher)
Internet Explorer (11.0 and higher)
Apple Safari (6.0 and higher)
Page 65 of 76
English