Tetra/Uhf Analogue Gateway Mode; General; Entering Tetra/Uhf Analogue Gateway Mode - Motorola Cleartone CM5000 Guide De Référence

TETRA/UHF Analogue Gateway Mode

General

The CM5000 allows you to establish gateway connection
between the TETRA network and an UHF analogue system.
Each time an unencrypted analogue radio user transmits to the
TETRA network an audible warning tone is sent to TETRA users in
group.

Entering TETRA/UHF Analogue Gateway Mode

The CM5000 must be connected to an analogue radio
through an analogue radio interface.
Choose the required TMO talkgroup before entering the
analogue/digital mode.
The CM5000 can switch to the analogue/digital mode only in group
mode.
To enter the analogue/digital gateway mode:
1. From the Home display press
Menu button and then
9 alphanumeric key. The
display shows the current UHF
channel selected on UHF
mobile.
2. Select the required UHF
channel using up/down navigation keys.
3. Select Gte to enter the analogue/digital gateway operation
Select Tet to return to TMO or DMO mode.
28
U