Emerson LURAY ECO CF860B000 Mode D'emploi page 31

15. Light Kit LED Driver Replacement
15.11
Reconnect the motor AC power connector to the Light
Kit LED Driver connector (Figure 50).
Reconnect the motor DC power connector to the Light
Kit LED Driver connector (Figure 50).
15.12
Replace the upper motor cover by reassembling the
three screws previously removed in Step 15.7.
Placement of the screws should be every other hole as
shown in Figure 51.
15.13
Re-seat the downrod in the motor coupler.
15.14
Rotate and align the two downrod holes with the two
holes in the motor coupler as shown in Figure 52.
Reassemble the downrod to the motor coupler by following
15.15
the Ceiling Fan Assembly, Sections 3, Steps 3.9 through
3.10.
15.16
Rehang your ceiling fan per Section 4, Step 4.2.
15.17
Rewire your ceiling fan per Section 7, Steps 7.1 through
7.6
Restore electricity and verify function of the Light Kit.
MOTOR DC POWER
CONNECTOR
MOTOR AC
POWER
CONNECTOR
LIGHT KIT LED
DRIVER AC POWER
CONNECTOR
Figure 50
Figure 51
4.5"
DOWNROD
Figure 52
31
(Continued)
LIGHT KIT LED DRIVER
DC POWER CONNECTOR
NEW LIGHT
KIT LED
DRIVER
UPPER MOTOR
COVER SCREWS (3)
UPPER
MOTOR
COVER
EVERY OTHER
MOUNTING HOLE (3)
ALIGN DOWN ROD
HOLE WITH MOTOR
COUPLER HOLE
MOTOR
COUPLER