Télécharger Imprimer la page

Quick CHC1202 M Manuel De L'utilisateur page 23

Publicité

Les langues disponibles

Les langues disponibles

FREE FALL
SET VALUE:
0.5 s
FREE FALL
ATTENTION: auto free fall management must be activated exclusively with windlasses equipped
with auto free fall system. Refer to the instruction manual relative to the windlass being used.
ATTENTION: If auto free fall management is activated, the "no sensor" signal time will vary
depending on the value entered in the AUTO FREE FALL parameter and the automatic descent
function will be deactivated; the latter will become active again once free fall management is
deactivated.
SETTING THE CHAIN COUNTER
SETTINGS MENU - CALIBRATION
AUTO FREE FALL
Through this management we set the time required by the windlass
auto free fall system to deactivate itself.
Select the available values: OFF, from 0.1s to 7s. (default: OFF)
Increase
Decrease
Confirm value and go back to CALIBRATION menu.
CHAIN UP
SPEED
20 M / M
0.1s - 7s
GB
SET SAIL
23

Publicité

loading