EINHELL GE-WS 18/35 Li Instructions D'origine page 24

5. Shake the pressure spray vigorously several
times.
6. Spray the contents onto the area just treated
or an area reserved for this purpose.
7. Repeat this process.
8. The container can now be drained through
the fi ller opening as described above.
9. Allow the container to dry out completely be-
fore attaching it to the motor part again.
7.3 Cleaning the nozzle and adjustable spray
head
If foreign bodies have collected in the nozzle and
clogged it up, clean the nozzle as follows (never
blow it out with your mouth!):
1. Turn the adjustable spray head counterclock-
wise as far as it will go (Fig. 18).
2. Clean the exposed nozzle (Fig. 19a) and the
hole in the spray head (Fig. 19b) of residue
using a thin wire.
3. Flush the nozzle and spray head with clear
water.
4. Allow the nozzle and spray head to dry.
7.4 Cleaning the fi lter element in the handle
(Fig. 20)
Clean the fi lter element in the handle at least
once a year, ideally after the winter break or when
there are problems (see section 10). Proceed as
follows:
1. Unscrew the union nut (Item 7a) from the
handle (Item 7).
2. Pull the fi lter (Item 7b) out of the handle (Item
7) and clean it with a brush in clear water.
3. Re-insert the fi lter (Item 7b).
4. Screw the union nut (Item 7a) securely back
onto the handle (Item 7).
7.5 Maintenance
There are no parts inside the equipment which
require additional maintenance.
7.6 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Anl_GE_WS_18-35_Li_SPK13.indb 24 Anl_GE_WS_18-35_Li_SPK13.indb 24
GB
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage and transport
9.1 Storage
Store the equipment and its accessories in a dark
and dry place at above freezing temperature.
The ideal storage temperature is between 5 and
30 °C. Store the electric equipment in its original
packaging.
Equipment must always be stored completely dry
and clean.
9.2 Transport
•
Switch off the equipment and remove the bat-
tery.
•
Fit the shipping protectors, if any.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine
- 24 -
14.06.2022 14:17:41 14.06.2022 14:17:41