Specifications; Storage; Cleaning And Care; Troubleshooting - Gazzini 10036256 Mode D'emploi

5 | Specifications

dia. 156 mm x 111 mm (bottom mount)
dia. 158 mm x 113 mm (side mount without bolts)
12 V / 15 W low beam, 27 W high beam, 2 W parking light, 10 W daytime running
light

6 | Storage

When you're not using the gazzini LED Headlight, store it in a closed room that is
protected against the weather and moisture. The air humidity should not exceed
80%.

7 | Cleaning and care

Clean the gazzini LED Headlight using warm soapy water or a motorcycle cleaner
and a soft cloth. Do not use a pressure washer, as it may damage the seals, and
water may get into the gazzini LED Headlight. Afterwards, use a wax-based care
product which will protect the surface against the elements. Do not apply the
care product to the headlight glass.

8 | Troubleshooting

Fault
The daytime running
light, parking light, low
beam or high beam is
not working.
Possible causes and remedies
Check the battery voltage with a multimeter to see
if it's >12 V.
Use a test lamp on the connector to check that the
positive lead is carrying current via the light switch
or via the daytime running light sensor.
Check the battery's earth connection.
If the power connection is working properly, the LED
in the headlight may be faulty. In this case, you will
need to replace the complete LED headlight unit.
Also check whether the fuse(s) are intact.
17