Functioning Of The Clorimax - Astralpool 16631 Mode D'emploi

SWIMMING
POOL
��
CAPACITY IN ��
0-50
50-100
100-200
200-300
300-450
Once the trichloro (34433, 34434, 34435, 34437)
load has been selected, depending on the volume of the pool, it is important to
maintain the load level within the CLORIMAX constant as it operates. To do so,
it is advisable to open the CLORIMAX every 3-4 days and replenish the load.
IMPORTANT: When the load of the CLORIMAX has to be replaced, the
latter must be put into operation for at least 30 minutes before being
opened.
The dosages of the products should be as shown in Tables 1 and 2.
In case of using products corresponding to other references, you should consult
our supplier.
10. FUNCTIONING OF THE CHLORIMAX
With the load inside the closed dispenser:
1. Keep the purge valve closed
2. Open the water outlet valve fully
3. Open the water inlet valve, adjusting it to obtain residual free chlorine
between 0.5 ppm and 2 ppm in the pool water. If it is disinfected with
bromine, its residual should be between 3 ppm and 6 ppm.
DISPENSER
MODEL
16631
or 15210
16631
or 15210
16631
or 15210
16632
or 15211
16632
or 15211
BROMIDE
16550 o 28740
COMPACT
LOAD (kg*s)
2-5
5-10
10-20
20-30
30-45
16550, 28740) bromine
o (
17
Concentration
(kg*s/l)
0-0.0001
0.0001
0.0001
0.0001
0.0001