Checchi & Magli UNIFOX Manuel D'utilisation Et D'entretien page 53

Handling and lifting the packed unit
WARNING
Lift the packed machine using appropriate hoisting
means for the load to lift.
Check the parcel weight stated on the packing itself.
UN41 0579GN
Lifting (UNIFOX)
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
Lifting operations must be carried out using suitable
means for the load to be lifted, by qualified and author-
UN41 0580GN
Proceed as outlined below.
1) Use the specific tool (A) provided with the work vehi-
cle for lifting.
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
A
13
Authorised personnel must comply with the instructions
contained on the packing, in particular those concern-
ing security.
Handle the packed equipment slowly, with care and cau-
tion, to prevent it swinging dangerously.
The illustration shows the harnessing points and lifting
procedure.
ised personnel in order to safeguard their own safety
and that of the other people involved in the operations.
The illustration shows the hook-up points for lifting the
work unit with two planting units fitted.
The hook-up points for lifting apply for all the UNIFOX
models.
2) Strap up the work vehicle as shown in the figure.
3) Check that the pin (B) is secured by the lock pin (C)
and that the chains are fastened stably to the frame
(D).
4
Use and maintenance