Through-Axle Wheel Installation - Cervélo P5X Manuel

THROUGH-AXLE WHEEL INSTALLATION

To secure the front wheel, install the greased axle,
through the drive side drop out, through the wheel
hub, and rotate to thread axle into opposite fork
drop out until tight.
If using an aftermarket wheelset, please refer to
the component manufacturer's service center or
website for further information.
Adjust brakes as per manufacturer's instructions.
Adjust shifting as per manufacturer's instructions.
Adjust shifting as per manufacturer's instructions.
Put axle lever in open position.
Once tightened, close lever to lock.
31