aqua HC150 Serie Manuel De Service Et D'entretien page 37

HC150 / HC101
Solenoid driven dosing pump
Disclaimer
The information included in these tables has been obtained from highly qualified sources
which we deem reliable and they are provided without any guarantee, explicit or implicit,
concerning their exactness.
Conditions or methods for handling, storage and use of the material are beyond our
control and/or knowledge.
For this reason and for other reasons we will not be held liable thereof and we expressly
waive obligations of claim for damages or relating to the information contained herein.
6 Return to the After-sales service
The material must be sent back in its packaging with all its original protection devices before the guarantee period
is completed.
The system must be clean and the chemical product removed from the tubes.
The manufacturer declines any responsibility regarding damages caused by transportation, if the
7 GUARANTEE CERTIFICATE
The producer guarantees pumps manufactured by them for a period of 12 months, starting from the date it was
delivered to the first user.
Within the above terms the producer agrees to provide spare parts for any parts that they, or their authorised
representative, believe present factory or material defects free of charge; or to carry out the repair directly or
through authorised workshops.
The producer is nevertheless excluded from any other responsibility and obligation regarding other expenses,
direct or indirect damage and losses deriving from the use or from the impossibility, either total or partial, to use the
pumps.
Any repairs or replacing of parts will neither extend nor renew the duration of the warranty period.
Costs to assemble and dis-assemble the pump from the system, shipping costs and consumables (filters, valves,
etc.) are borne by the user.
The manufacturer's obligations, envisioned in the previous paragraphs, are not valid if:
 The pumps are not used in compliance with the instructions provided on the operating
and maintenance booklet.
 The pumps are repaired, dismantled or modified by workshops that have not been
authorised by the manufacturer.
 Non-original parts have been used.
 The injection systems have been damaged by non-compliant products.
 The electrical systems breakdown due to external factors such as surges, any kind of
electrical discharges etc.
WHEN THE WARRANTY PERIOD EXPIRES 12 MONTHS AFTER DELIVERY OF THE PUMP, THE
MANUFACTURER IS RELIEVED OF ANY RESPONSIBILITY AND OBLIGATION DESCRIBED IN THE ABOVE
PARAGRAPHS!
ADSP9500090
aforementioned conditions are not respected.
Rev.2.5 09.09.2015
MAINTENANCE
ENGLISH
37