Starting/Stopping Therapy - ResMed AirSense 11 Mode D'emploi

Starting/Stopping therapy

WARNING
The machine is not intended to be operated by persons (including children) with reduced physical,
sensory or mental capabilities without adequate supervision by a person responsible for the
patient's safety.
To start therapy:
1. Fit your mask
2. Press the Start therapy/Standby button or breathe normally if SmartStart is enabled
Therapy will begin and the treatment screen is displayed. A dynamic pulse wave will appear during
therapy.
To review your sleep progress, click on
Notes:
The screen will fade and then go black automatically after a short period of time. Tap the screen to turn
it back on.
If power is interrupted during therapy, the device will automatically restart therapy when power is
restored.
The device has a light sensor that adjusts the screen brightness based on the light in the room.
To stop therapy:
1. Remove your mask.
2. Press the Start therapy/Standby button or wait until the device stops if SmartStop is enabled.
10
to view more details