Ayce 5325.1 Traduction De La Notice Originale page 90

OPERATION
1. Before use
Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your purpose.
If the machine is new, the battery must first be charged.
Attention! After long time storage, the battery capacity will be reduce.
A new battery or one which has not been used for an extended period achieves
full performance only after charging and discharging cycles. A substantial drop
in operating period per charge indicates that the battery is worn out and must be
replaced.
2. Battery charging (Fig.1)
Fig. 1
making sure the battery pack is fully seated.
3 The charger will communicate with the battery pack to evaluate the condition
of the battery pack.This lithium-ion battery pack is shipped partially charged.
Before using it the first time, fully charge the battery pack. A fully discharged
battery pack with a temperature between 0 °C and 40 °C will charge in about 1
hour.
4. When the battery pack temperature is between 50°F (10°C) and 140°F (60°C),
and the battery is significantly depleted, the QuickBoost button will shine
yellow.
5. Depress the button to charge the battery. The QuickBoost button will shine
green to indicate QuickBoost charge, and it will begin flashing
The battery pack for this product has been
shipped in a low charge condition. Charge
it fully before first use
The QuickBoost function charges a fully
depleted battery pack to approximately
20% capacity in 3 minutes in a normal
operating temperature: between 50°F
(10°C) and 140°F (60°C).
1. Connect the charger to a suitable
power supply, the red Defect light,
green Normal light and yellow
QuickBoost light will come on for one
second and then go out.
2. Align the raised ribs on batter pack
with the grooves in the charger insert
the battery pack into the charger