Timer; Switching Off - CASO DESIGN Pro Master 1800 Mode D'emploi Original

4.1.4 Timer

4.1.5 Switching off

caso Pro Master 1800
the power levels or with the temperature stages. The most
recently selected function is active.
 The temperature is measured by a sensor underneath the
glass ceramic plate, therefore the displayed temperature can
deviate from the temperature in the pot. We recommend
starting with a power setting first and after the temperature of
the plate has normalized (3 to 4 minutes), you can switch to
temperature control.
PLEASE NOTE
► In case of grilling or deep frying food we advise using the
function "Temperature" as in this case you can use
temperatures up to 430°F. Otherwise the overheating
protection "E05" will be activated.

·Timer Function. Press the button Timer 2.

·With the +/- keys, you can now select the operating time in
1-minute intervals (up to max. 180 minutes). Once the
time is up, an acoustic signal sounds and the appliance
automatically goes into standby mode.
PLEASE NOTE
► During timer operation, you can change the duration at any
time with the +/- keys. With the memory function of the
appliance, the power stage or temperature settings remain
unchanged here.
 When you switch off the appliance via "On/Standby" and the
temperature of the burner is lower than 120°F, the display
shows „L". When the temperature of the burner is over
120°F, it is displaying „H".
PLEASE NOTE
► Do not place any empty cookware on the induction field.
Heating an empty pot or pan activates the overheating
protection and the appliance turns off.
► Do not operate the appliance if it is damaged in any way or
does not function properly.
► The use of accessories and spare parts not recommended
by the manufacturer may lead to damage of the appliance
and injuries.
25