Preventing Radio Interference; Electrical Connection - CASO DESIGN Pro Master 1800 Mode D'emploi Original

3.5.1

Preventing radio interference:

caso Pro Master 1800
 The setup of this appliance in non-stationary locations (e.g.,
boats, airplanes, motor homes) must be carried out by a
qualified electrician, provided they guarantee the
prerequisites for the safe use of the appliance.
The appliance can cause interference with radios, televisions or
similar appliances. Interference can be removed or reduced by
using the following measures:
 Place the radio, television etc. as far away from the
appliance as possible.
 Connect the appliance to a different socket, so different
electric circuits are being used for the appliance and the
receiver experiencing interference.
 Use a correctly installed aerial for the receiver in order to
ensure good reception.

3.6 Electrical connection

In order to ensure the safe and trouble-free operation of the
appliance, the following instructions must be observed for the
electrical connection:
 Before plugging in the appliance, compare the voltage and
frequency data on the induction cooktop's rating plate (found
on the bottom of the appliance) with that of your electrical
network. This data must be compatible. If in doubt consult a
qualified electrician.
 The use of a multi-plug outlet adapter (power strip) is not
recommended due to fire danger.
 Inspect the power cord for damage and ensure it doesn't run
under the appliance or over hot or sharp surfaces.
 The electrical safety of the appliance is only guaranteed if it
is connected to a properly installed fused system. Use of the
appliance without a fuse is prohibited. If in doubt, consult a
qualified electrician. The manufacturer cannot be made
responsible for damages due to a missing or damaged
protective conductor.
 Make sure that you always use a grounded wall socket to
connect the appliance.
 This appliance may not be used through an external timer or
by means of a remote control.
18