Unpacking; Disposal Of The Packaging; Setup; Setup Location Requirements - CASO DESIGN Pro Master 1800 Mode D'emploi Original

3.5.1

Setup location requirements:

caso Pro Master 1800

3.3 Unpacking

Carefully remove the packaging material and appliance from
the carton.

3.4 Disposal of the packaging

The packaging protects the appliance against damages during
transit. The packaging materials are fully recyclable.
PLEASE NOTE
► If possible, keep the original packaging for the appliance for
the duration of the warranty period, so that the appliance can
be re-packaged properly in the event of a warranty claim.

3.5 Setup

In order to ensure the safe and trouble-free operation of the
appliance, the area where it is to be used must comply with the
following prerequisites:
 The appliance must be set up on a solid, even, horizontal
surface capable of supporting the induction cooktop.
 The induction cooktop must not be operated on a surface
with an iron or steel content, as this can heat up
considerably.
 Select a setup location where children cannot reach the
appliance.
 The appliance is not intended as a built-in appliance.
 Do not set up the appliance in a hot or damp environment or
near flammable materials.
 Do not set up the induction cooktop in the vicinity of
appliance and objects which react sensitively to magnetic
fields (e.g.: radios, televisions, tape recorders, etc.).
 To operate correctly, the appliance requires sufficient air
flow. Leave at least 4 inches (10 centimeters) of space on all
sides when setting up the appliance.
 The cool air is drawn in by the base of the appliance. Do not
cover or block any of the appliance's openings.
 Do not move the induction cooktop when it is in operation.
 The electrical outlet must be easily accessible so that the
plug can be quickly disconnected in case of an emergency.
17