Etherma LAVA FRAME-350 Instructions D'installation Et D'utilisation page 12

U S E A N D I N S T A L L A T I O N I N F O R M A T I O N F O R T H E I N S T A L L E R
› LAVA ® FRAME infrared heating devices comply with the rele-
vant safety requirements.
› Installation and initial start-up, as well as repairs and servic-
ing, may be carried out by a licensed specialist or qualified
individual only. All safety regulations must be observed. This
person must verify first whether the electrical in-house
system complies with the relevant standards. The respon-
sibility of the manufacturer is limited to supply of the device.
› Comply with country-specific safety regulations.
› Comply with local safety precautions.
› The devices are suitable for the installation on walls and on
ceilings.
› Protective areas must be observed in accordance with DIN
VDE 0100, part 701, when installing the device in bathrooms.
› Minimum distances must be adhered to.
35 mm
Dimensional drawing: minimum mounting clearances
ATTENTION: Strain of any kind on the surface,
whether from persons or objects leaning against
it or from other forces, must be avoided!
H O L E C U T - O U T F O R T H E W A L L / C E I L I N G I N S T A L L A T I O N F R A M E
Type
LAVA-FRAME-350
LAVA-FRAME-500
LAVA-FRAME-750
LAVA-FRAME-1000
WOODEN OR SHEET ROCK CEILING
12
35 mm
35 mm
35 mm
Art. no. Output (W)
40505 350
40506 500
40507 750
40508 1000
Shadow joint
INSTALLATION AND MINIMUM DISTANCES:
LAVA ® FRAME infrared heating devices have to be mount-
ed so that flammable objects cannot catch fire. Be absolutely
sure to comply with minimum clearances, in particular to high-
ly combustible objects such as curtains, upholstered furniture,
etc. Please also make sure that the infrared heater can radiate
freely into the room.
Dimensions without frame (mm)
Cut-out dimensions
(mm)
634 x 634 x 75
634 x 914 x 75
634 x 1259 x 75
634 x 1614 x 75
LAVA ® FRAME
Shadow joint
Length Width
620 620
900 620
1245 620
1600 620
WOODEN OR SHEET ROCK CEILING
Weight without
frame (kg)
7.5
12
16
21