JVC KD-X320BTS Manuel D'instructions page 19

BLUETOOTH®
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press
1
Repeat steps
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( Make a call using voice recognition)
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Delete a contact
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL], then press the knob.
3
Turn the volume knob to select a contact.
4
Press and hold to enter delete mode.
5
Turn the volume knob to select [DELETE] or [DELETE ALL], then press
the knob.
DELETE: Selected name or phone number in step
DELETE ALL: All names or phone numbers in [RECENT CALL] in step
deleted.
6
Turn the volume knob to select [YES], then press the knob.
• To return to the previous setting item, press
• Not applicable for mobile phone that supports PBAP.
to move the entry position.
2
and until you finish entering the phone number.
3
is deleted.
.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or
[DIAL NUMBER], then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in step
and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO PRESET" appears if there is no contacts stored.
Bluetooth mode settings
1 Press and hold
2 Turn the volume knob to select [BLUETOOTH], then press the knob.
3 Turn the volume knob to make a selection ( 18), then press the
2
is
knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press
To return to the previous setting item, press
.
to exit.
.
2
17
ENGLISH