JVC KD-X320BTS Manuel D'instructions page 15

SiriusXM® Radio
SiriusXM settings
1
Press and hold
2
Turn the volume knob to select [SIRIUS XM], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then
press the knob.
4 3
Repeat step until the desired item is selected/activated or follow the
instructions stated on the selected item.
5
Press to exit.
To return to the previous setting item, press
CH LOCK To unlock settings:
1 Turn the volume knob to select a number.
2 Press
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
1 Press the volume knob to enter [NEW CODE].
CODE SET
2 Turn the volume knob to select a number.
3 Press
4 Repeat steps 2 and 3 to enter a new 4-digit pass code.
5 Press the volume knob to confirm.
6 Repeat steps 2 to 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next time.
LOCK SET MATURE CH: Selects the SiriusXM-defined lock setting. ; USER DEFINED: Selects the
user-defined lock setting. ; OFF: Cancels.
CH EDIT * 1
1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the knob.
"L" appears in front of the channel number.
3 Press and hold
CH CLEAR * 1
YES: Clears all the locked channels. ; NO: Cancels.
.
.
to move to the entry position.
to move to the entry position.
to exit.
TUNE START * 2
SIGNAL LVL
BUF USAGE
SXM RESET
* 1
Displayed only when [USER DEFINED] is selected.
Default: XX
* 2
Available only if the connected SiriusXM Vehical Tuner is SXV200 or later that
supports SmartFavorites.
ON: Selected SmartFavorite channel starts playback from
the beginning of the song. ; OFF: Cancels.
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength
of the current received signal.
0% — 100% (0): Shows the memory usage for Replay
buffer.
YES: Resets stored channel and lock setting to default. ;
NO: Cancels.
ENGLISH
13