Functions - DS Produkte VR-101A Mode D'emploi

Once the device has docked on the charging station, it will automatically start
to recharge. The indicator light on the charging station will switch from green to
red. The charge level indicator (19) on the display will light up and fl ash as long
as the device is charging. Once the rechargeable battery is fully charged, the
indicator will stop fl ashing and the display will turn off after approx. 30 seconds.
With the
can tell the device to return to the charging station and recharge.

Functions

When the device is completely switched off (toggle switch is set to 0), all
settings will be deleted.
The device has four different vacuuming modes. You can use the menu button
on the device or the corresponding buttons on the remote control to select
these modes.
You can also use the directional buttons to steer the robotic vacuum cleaner
manually.
In each mode, the device will vacuum until the rechargeable battery is low. It will
then automatically locate the charging station.
The robotic vacuum cleaner has the following vacuuming modes:
Random cleaning mode: The robotic vacuum cleaner will travel
straight ahead until it encounters an obstacle, it will then veer off and
travel straight ahead in another direction.
Spiral cleaning mode: The robotic vacuum cleaner will begin by
travelling from the inside to the outside in an increasingly large
spiral. It will then travel from the outside inward in an increasingly
small spiral. Once it has reached its starting position, it will look for a
new area and begin the process again.
Edge cleaning mode: The robotic vacuum cleaner will move forward
until it encounters an edge (e.g. wall, piece of furniture), it will then
travel along this edge until it reaches the next edge.
Auto cleaning mode: The robotic vacuum cleaner will automatically
combine the three other cleaning modes.
Setting the time and day
1. To set the current time, simultaneously push the buttons
23) in standby mode.
2. The hour display will start to blink. Push the buttons
hour) (23, 24) to set the hours. )
3. Push the button again. You can now set the minutes with the buttons
(+1 minute) or
06025_DE-GB-FR-NL_A5_V5.indb 35 06025_DE-GB-FR-NL_A5_V5.indb 35
35
button (automatic charging) on the remote control, you
(-1 minute).
EN
and (22,
(+1 hour) or (-1
24.04.2015 10:12:24 24.04.2015 10:12:24