WAGNER WoodPerfect W 600 Traduction Du Mode D'emploi Original page 25

W 600 WoodPerfect
Assembly
Slide the nozzle seal (Fig. 10 1) with the groove (slot) facing forwards into the nozzle
(Fig. 10 2). Put the nozzle onto the gun body and find the correct position by turning it.
Put the air cap onto the nozzle and tighten it using the union nut.
Place the container seal from below on the suction tube and slide it over the collar, while
turning the container seal slightly. Insert the suction tube with container seal in the gun
body.
Maintenance
Change the air filter if it is soiled. For this pull the air filter out of the unit (Fig. 9). Insert a
new air filter.
WARNING! Never operate the machine without the air filter; dirt could be sucked in
and interfere with the function of the machine.
Pos. Name
1 Union nut
2 Air cap
3 Nozzle
4 Nozzle seal
5 Spray gun incl. 1400 ml. container
6 Air hose
7 Carrying belt
8 Air filter
9 Container with cover 1400 ml
10 Suction tube
11 Container seal
12 Stir stick
Name
Container with cover 800 ml
Ensures that the paint does not dry out and the solvent does not evaporate.
Further information about the WAGNER range of products for renovating is available
under www.wagner­group.com
Spare Parts List (Fig. 11)
Accessories (not included in the delivery)
GB
Order No.
0417 319
2305 129
0414 352
0417 706
2325 278
2319 307
2322 299
2308 502
0417 921
0417 357
0417 358
2304 419
Order No.
0413 909
19