Publicité
Les langues disponibles
Les langues disponibles
W 600 WoodPerfect
f)
If you cannot avoid using the tool in a damp environment, use a residual
current operated circuitbreaker. Using a residual current operated circuit-breaker
avoids the risk of electric shock.
3. Safety of Persons
a)
Be attentive. Pay attention to what you are doing and work sensibly with
a power tool. Do not use the tool if you are tired or under the influence of
drugs, alcohol or medication. Just a moment of inattentiveness while using the
tool can lead to serious injuries.
b)
Wear personal safety equipment and always wear safety goggles.
personal protective equipment, such as dust mask, non-slip safety shoes, safety helm
or ear protection, depending on the type of power tools, reduces the risk of injury.
c)
Avoid accidental startingup. Ensure that the switch is in the "OFF" position
before inserting the plug into the socket. Accidents can occur if you carry the
power tool while your finger is on the switch or if you connect the power tool to the
power supply which it is on.
d)
Remove setting tools or wrenches before switching on the power tool.
or wrench that is in a rotating tool part can lead to injuries.
e)
Avoid an unnatural posture. Ensure that you are standing securely and
have your balance at all times. This ensures that you can control the tool better in
unexpected situations.
f)
Wear suitable clothing. Do not wear wide clothing or jewelry. Keep your hair,
clothes and gloves away from moving parts. Loose clothing, jewelry or long hair
can be caught in moving parts.
g)
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
4. Careful Handling and Use of Power Tools
a)
Do not overload the tool. Use the power tool designed for the work that you
are doing. You work better and safer in the specified performance range if you use
the suitable power tool.
b)
Do not use power tools whose switch is defective.
switched on or off is dangerous and has to be repaired.
Wearing
A power tool that cannot be
GB
A tool
13
Publicité
