Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en | 16 | Installation and Operating Instructions | Bosch™ EV400 Series Charging Station
7.6 Masonry Wall Installation
1.
Using adhesive tape, secure the mounting template (included on page 18 of this manual) to the desired mounting
location on the wall surface. Mount the template at a height of 45" from the floor to the bottom of the template.
2.
Using a 1/8" (3-mm) masonry drill bit, drill 2-holes at the target-points (denoted with the symbol) on the template.
These two points are vertically located with reference to each other. (They are also 4.9 in [125-mm] apart.)
REV E | 02.19.2019
Publicité
Chapitres
Table des Matières
Dépannage
