Regulatory Information; Environmental Considerations; Product Specification; Radio And Television Interference - Bosch EV400 Serie Guide D'installation/Mode D'emploi

en | 6 | Installation and Operating Instructions | Bosch™ EV400 Series Charging Station
3

Regulatory Information

3.1 Environmental Considerations

At the end of service life, the EV400 should be recycled
according to local laws and regulations.
3.2 Product Specification
All EV400 specifications and descriptions are accurate at
the time of this document's printing. We always strive to
constantly improve and update our products. Bosch
reserves the right to make changes at any time, without
notice and without obligation.

3.3 Radio and Television Interference

The equipment described in this manual has been
designed to protect against Radio Frequency Interference
(RFI). However, there are some instances where
high-powered radio signals or nearby RF-producing equip-
ment (such as digital phones, RF communications equip-
ment, etc.) could affect EV400 operations. If interference
to the EV400 occurs during charging, contact Bosch.
REV E | 02.19.2019
4 Features and Specifications
The EV400 includes ground-fault protection, automatic
reset upon grid power loss, ground assurance monito-
ring, and self-testing capabilities. Manual resetting of the
EV400 is not necessary.
Exception: European model EL -52503-FEU requires
manual resetting after a ground-fault condition.

4.1 Ground Fault Protection

Continually provides a safe power supply to the vehicle.
If a ground fault is present, the EV400 detects it and cuts
power flow, protecting people and the vehicle from an
electric shock hazard.

4.2 Automatic Reset

If main line side power supply is interrupted during
charging, the EV400 will reset itself automatically and
re-attempt charging after main line side power supply is
restored.
If the problem is associated with a ground fault, the
EV400 makes automatic reset attempts in sequential 15
second periods. If the charging mode can not be
restored, the appropriate failure indication of a solid red
Status light will appear on the unit's front panel.
NOTE: Not applicable on European models; European
models require pressing of the master-clear "Reset"
button on the front panel of the EV400 to restore power.
See the Power and Status LED Indications Table (page 19).
The automatic reset feature ensures that your vehicle will be
charged and ready to use by automatically restoring power
after temporary interruptions (grid-power outages, temporary
ground faults, and power surges [US models only]).

4.3 Ground Assurance Monitoring

A proper electrical ground is critical to reliable ground-
fault protection. The EV400 includes a ground monitoring
circuit to assure presence of a safe electrical ground.

4.4 Self-Testing

To assure proper functionality and safety, the EV400
includes self-testing and diagnostics circuitry, which is
automatically performed prior to each charging cycle.