Roche Accu-Chek Aviva Nano Manuel De L'utilisateur page 10

1
Your New System
Button Functions
Here are the functions of the power/set button and arrow buttons on the meter. These functions are used
throughout this manual. For more information on using these buttons during meter setup, see Chapter 3,
Meter Memory, Setup, and Data Transfer.
Button Function
Turn the meter on or o .
(power/set
button)
Enter the set-up mode.
Set the chosen feature.
Exit the set-up mode at any
time.
Check the display segments. Turn the meter o . Press and hold
Adjust settings for time and
(right arrow date, beeper, test reminders,
and left and hypoglycemic alert.
arrow
buttons)
Enter memory.
Mark a blood glucose result. Press and release
8
Action
Press and release .
Turn the meter on. Press and hold
appears on the display.
Press and release .
Press and hold until the flashing test strip symbol
appears on the display.
complete display.
If one of the segments is missing or looks di erent from
the picture, do not use the meter. Contact Accu-Chek
Customer Care at 1-800-363-7949.
Press and release or
Press and hold or
Press and release or
.
until set-up
to see the
.
to scroll faster.
.